Remove the door in order to prevent
damages during assembly and
installation.
STEP 3
Screw the pins into the pre-drilled
holes on the face frame (two on each
side).
STEP 4
Screw the pins into the pre-drilled
holes on the side panels (four in
each panel).
STEP 5
Place the side panel on the face
frame into the groove. Make sure
that the pins can go into the
pre-drilled holes on the side panel.
STEP 6
Repeat Step 5 for the side, top and
bottom panels.
STEP 7
After the pins are inserted, insert
the cam lock into the pre-drilled
holes and tighten it using a regular
screwdriver.
Repeat this step with all the
panels.
STEP 8
Slide the back panel into the groves
of the side panels.
STEP 9
Secure the back panel to the cabinet
using the provided screws into the
pre-drilled holes.
STEP 10
Place the adjustable shelves using
the provided shelf holders.
