 |
STEP 1 |
 |
|
Locate the face frame and the front
door |
 |
|
|
| |
|
|
STEP 2 |
|
|
Remove the door from the frame |
 |
|
|
| |
|
|
STEP 3 |
|
- Locate the bottom shelf the the
Black rotating hinge.
- Connect the Black spinning hinge
to the bottom shelf using four
screws.
- Make sure the grove of the bottom
shelf (at the bottom of this photo)
will face up. |
 |
|
|
| |
|
|
STEP 4 |
|
|
Locate the bottom spinning tray (the
one with the three pre-drilled holes
on the bottom (the top spinning tray
has four pre-drilled holes). |
 |
|
|
| |
|
|
STEP 5 |
|
|
Connect the bottom shelf to the
spinning tray using three screw from
the back (the bottom) of the bottom
shelf. |
 |
|
|
| |
|
|
STEP 6 |
|
|
Close up on the back (bottom) of the
bottom shelf. |
 |
|
|
| |
|
|
STEP 7 |
|
|
This is how the spinning tray should
look like when connected to the
bottom shelf. |
 |
|
|
| |
|
|
STEP 8 |
|
|
Connect the face frame to the front
site panel using two of the supplied
angled brackets. |
 |
|
|
| |
|
|
STEP 9 |
|
|
Connect the other front side panel
using two additional angled
brackets. |
 |
|
|
| |
|
|
STEP 10 |
|
|
Insert the bottom shelf with the
spinning tray in the pre-drilled
slots on the front side panels and
the face frame. |
 |
|
|
| |
|
|
STEP 11 |
|
|
Connect the back side panel to the
front side panel using the supplied
90 degrees bracket. |
 |
|
|
| |
|
|
STEP 12 |
|
|
Secure the back side panel to the
bottom shelf using three screws in
the pre-drilled holes. Do not secure
the screw all the way in this point
to allow some flexibility until all
the panels will be connected
properly. |
 |
|
|
| |
|
|
STEP 13 |
|
|
Repeat the last two steps with the
other side. |
 |
|
|
| |
|
|
STEP 14 |
|
|
Slide in the back panel in the
pre-drilled slots. |
 |
|
|
|
|
|
|
STEP 15 |
|
|
Connect the top support piece using
three screws to the back panel and 2
screws on each side to the back side
panels. |
 |
|
|
|
|
|
|
STEP 16 |
|
|
Locate the top spinning tray, the
top Black spinning hinge and the top
shelf. |
 |
|
|
|
|
|
|
STEP 17 |
|
|
Connect the top black spinning hinge
to the top shelf using four screws.
Make sure the pre-drilled holes on
the top shelf are facing up |
 |
|
|
|
|
|
|
STEP 18 |
|
|
Connect the top black spinning hinge
to the back of the top spinning tray
using four screws in the pre-drilled
holes. |
 |
|
|
|
|
|
|
STEP 19 |
|
|
Place the top shelf with the
spinning tray on top of the two
support blocks on the back side
panels. Secure using two screws on
each side. |
 |
|
|
|
|
|
|
STEP 20 |
|
|
Connect the toe-kick piece on the
bottom of the cabinet using two
screws on each side. |
 |
|
|
|
|
|
|
STEP 21 |
|
Connect the door to the face frame.
Your cabinet is now ready! |
 |
|
|
