Ready To Assemble Kitchen Cabinets
Click here for a FREE no obligation sample
Lowest price guarantee
877-210-6361My Kitchen ProCabinet catalogStart_your_projectDesign_serviceView quote

ASSEMBLY INSTRUCTIONS - BASE LAZY SUSAN CABINET

NEED HELP?

Contact Information : Kitchen Pro Ready To Assemble Kitchen Cabinets
 

INSTALLATION RESOURCES

Research Center
Kitchen Cabinets Glossary
Installation Frequently Asked Questions
 

SITE POLLS

Please rank the ease of assembly:
Assembly is very easy
Assembly is a little complicated
Assembly is very complicated
You need to be an experienced carpenter
 

RECOMMENDED INSTALLATION TOOLS

Flathead / Philips Screwdriver
Required Tool

Electric Screwdriver
Recommended Tool

Rubber Head Hummer
Recommended Tool

3/4" Staples Gun
Recommended Tool

Hot Glue Gun
Recommended Tool
 

CABINETS SELECTION

Click here to browse our cabinets' catalog
 

THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES:

Country Maple Kitchen Cabinets Honey Oak Kitchen Cabinets Traditional OakKitchen Cabinets Modern Beech Kitchen Cabinets Shaker Maple Kitchen Cabinets Luxurious Cherry Kitchen Cabinets Royal Chocolate Kitchen Cabinets White Glazed Maple Kitchen Cabinets
Country Maple Honey Oak Traditional Oak modern Beech Shaker Maple Luxurious Cherry Royal Chocolate White Glazed
Click any image to enlarge
STEP 1
Remove the doors from the face frame.
Screw the pins into the face frame.

STEP 2
Connect the face frame to the cabinet frame.

STEP 3
Make sure to insert and tighten the cam lock of the joint between the two frames (one on the top and one on the bottom).

STEP 4
Turn the frame sideways and inset the side panel into the groove.
Secure it with cam locks.

STEP 5
Identify the top and bottom spinning trays.
Note: The the top shelf has a bigger 90 degree cut on the bottom left corner (the right panel in the photo).

Kitchen Cabinet - Assembly Picture
STEP 6
Set the bottom shelf in its place and secure it with the cam locks.

STEP 7
Insert the left back panel into its place and secure it with the cam locks.

STEP 8
Set the top shelf with the spinning tray in its place and secure it with screws.

STEP 9
This is another view of the cabinet with both spinning trays installed

STEP 10
Set the right back panel and the other side panel in their place and secure them with the cam locks.

STEP 11
Secure the side panel to the face frame using the screws.

STEP 12
Connect the plastic corner brackets to support the cabinet structure.

STEP 13
Connect the toe kick plates to each other using two screws in the pre-drilled holes.

STEP 14
Connect the toe kick plate to the cabinet using the pre-drilled holes.

STEP 15
Congratulations! Your cabinet is ready!