Kitchen Cabinets Installation: Kitchen Pro's Base Cabinet

		FAQ			Contact Info

		My Kitchen Pro			Home

About Us // Research Center // Get Started // Cabinets Catalog // My Kitchen Pro

ASSEMBLY INSTRUCTIONS - BASE CABINET
THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES:

Country Maple	Honey Oak	Traditional Oak	modern Beech	Shaker Maple	Luxurious Cherry	Royal Chocolate	White Glazed
Click any image to enlarge

NEED HELP?

INSTALLATION RESOURCES

Installation Resources
Research Center
Kitchen Cabinets Glossary
Installation Frequently Asked Questions

RECOMMENDED TOOLS

	Flathead / Philips Screwdriver Required Tool

	Electric Screwdriver Recommended Tool

	Rubber Head Hummer Recommended Tool

	3/4" Staples Gun Recommended Tool

	Hot Glue Gun Recommended Tool

Cabinets Selection

Click here to browse our cabinets' catalog

Site Polls

Please rank the ease of assembly:

Assembly is very easy

Assembly is a little complicated

Assembly is very complicated

You need to be an experienced carpenter

STEP 1

Locate the face frame.
Remove the door in order to prevent damages during assembly and installation.
Screw the pins in the pre-drilled holes on the face frame.

STEP 2

Screw the pins into the pre-drilled holes on each of the side panels.

STEP 3

Place the side panel into the groove of the face frame. Make sure all the pins are aligned and inserted into the pre-drilled holes on the side panel.

Ready To Assemble Kitchen Cabinets - Assembly Picture

STEP 4

Insert the back panel. Make sure the pins are aligned and inserted into the pre-drilled holes on the side panel.

Maple Kitchen Cabinets - Assembly Picture

STEP 5

Repeat Step 4 with the other side panel

STEP 6

Slide in the back of the cabinet.

STEP 7

Insert and tighten the cam locks.

STEP 8

Attach the drawer guide holders to the back of the cabinet using the pre-drilled holes. Make sure both of them are aligned and level.

STEP 9

Connect the plastic corner brackets to add support to the cabinet structure.

Wholesale Kitchen Cabinets - Assembly Picture

STEP 10

Place the drawer guides into the holders and connect them to the back of the cabinet.
Connect the drawer guides to the front of the cabinet within the inner side of the face frame.

STEP 11

Locate all of the drawer parts.

STEP 12

Connect the side of the drawer to the drawer face by securing the screws in the pre-drilled holes on the side of the drawer.
Repeat this step with the other side of the drawer.

Quality Kitchen Cabinets - Assembly Picture

STEP 13

Slide in the bottom panel of the drawer.

All Wood Kitchen Cabinets - Assembly Picture

STEP 14

Connect the back panel of the drawer into both side panels using two screws for each side.

STEP 15

Set the drawer in its place.
Insert the adjustable shelves using the supplied shelf holders.

Congratulations, your cabinet is ready!

ASSEMBLY INSTRUCTIONS - BASE CABINET