Ready To Assemble Kitchen Cabinets
Click here for a FREE no obligation sample
Lowest price guarantee
877-210-6361My Kitchen ProCabinet catalogStart_your_projectDesign_serviceView quote

ASSEMBLY INSTRUCTIONS - BASE CABINET

NEED HELP?

Contact Information : Kitchen Pro Ready To Assemble Kitchen Cabinets
 

INSTALLATION RESOURCES

Research Center
Kitchen Cabinets Glossary
Installation Frequently Asked Questions
 

SITE POLLS

Please rank the ease of assembly:
Assembly is very easy
Assembly is a little complicated
Assembly is very complicated
You need to be an experienced carpenter
 

RECOMMENDED INSTALLATION TOOLS

Flathead / Philips Screwdriver
Required Tool

Electric Screwdriver
Recommended Tool

Rubber Head Hummer
Recommended Tool

3/4" Staples Gun
Recommended Tool

Hot Glue Gun
Recommended Tool
 

CABINETS SELECTION

Click here to browse our cabinets' catalog
 

THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES:

Cherry Maple Kitchen Cabinets Espresso Maple Maple Kitchen Cabinets French Antique Maple Kitchen Cabinets Honey Maple Kitchen Cabinets Macchiato Maple Kitchen Cabinets
Cherry Maple Espresso Maple French Antique Glazed Honey Maple Macchiato Maple
Click any image to enlarge
STEP 1:
Remove the door from frame.

It is best to re-install the door after the installation of all cabinets. Otherwise, doors might be damaged during the assembly and installation.

STEP 2:
Locate the two top support pieces.

STEP 3:
Secure the side panel to the frame using 1/4'' wide by 3/4'' deep staples every 6''.

STEP 4:
If you are using hot glue (optional, but recommended) make sure to apply a thin layer of glue over the connection of the side panel and the frame (from the inside of the cabinet as shown in the photo).

STEP 5:
Repeat Steps 3 and 4 with the other side panel.

STEP 6:
Insert the bottom panel through the grooves.

Staple every 4-6'' and apply hot glue.

STEP 7:
Slide in the back panel starting from the bottom moving toward the top.

STEP 8:
Make sure both panels are aligned. Otherwise, it will be very difficult to level the plywood for the countertop.

STEP 9:
Staple the bottom of the back panel to secure it to the frame (use 3/4'' staples every 4-6'').

STEP 10:
Staple the side panel to the cabinet for extra reinforcement. Use either 3/4'' or 1'' staples.

Use two staples on each side of the cabinet.

STEP 11:
Locate the toe kick plate.

STEP 12:
Staple it to the bottom of the cabinet using 3/4'' staples every 4-6''.

STEP 13:
Congratulations! Your cabinet is now ready. Please see the drawer assembly instructions for further assistance.