ASSEMBLY INSTRUCTIONS - BASE CABINET
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
SITE POLLS
Please rank the ease of assembly:
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
|
THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES: |
||||
 |
 |
 |
 |
|
| Cinnamon Maple | Mocha Glazed Maple | Cherry Walnut | Shaker Beech | |
| Click any image to enlarge | ||||
STEP 1:
Locate the face frame.
It is best to re-install the door after the installation of all cabinets. Otherwise, doors might be damaged during the assembly and installation.
It is best to re-install the door after the installation of all cabinets. Otherwise, doors might be damaged during the assembly and installation.
STEP 2:
Remove the door and the drawer front (in order to prevent damages during the assembly or the installation).
STEP 3:
Locate the right side panel and place it in the groove of the face frame.
STEP 4:
Secure the panel to the face frame using the screws of the cam lock system.
STEP 5:
Repeat the last two steps with the other side.
STEP 6:
Slide in the bottom panel of the cabinet in the grooves of the face frame and the side panels and secure it using the cam lock system.
STEP 7:
Align and secure the back panel of the cabinet into the plastic bolts on the side panels. Secure it using the cam lock system.
STEP 8:
Flip the cabinet and attach the toe kick panel. Secure it using the cam lock system.
STEP 9:
Attach and secure the enclosed plastic brackets for added support to the structure of the cabinets.
STEP 10:
Connect the side of the drawer to the back panel of the drawers (no screws needed).
STEP 11:
Connect the other side of the drawer to the back panel.
STEP 12:
Slide in the bottom panel of the drawer into the grooves.
STEP 13:
Connect the face frame to the two side panels.
STEP 14:
Connect the drawer guides into the bottom of the drawer using screws in the pre-drilled holes.
STEP 15:
Connect the drawer glides holders to the back of the cabinet using the pre-drilled holes for alignment.
STEP 16:
Connect the drawer glides to the drawer glides holders on the back and to the face frame on the front. You can use any of the pre-drilled holes in the front of the drawer guides for alignment.
STEP 17:
Your cabinet is almost ready.
STEP 18:
Place the bottom shelf using the supplied shelves holders and place the drawer.
Congratulations. Your cabinets is now ready.
Congratulations. Your cabinets is now ready.
My Kitchen Pro |
View Quote |
Design Service |
Cabinets Catalogs |
Research Center
Start Your Project | Tell Your Friends About Us | Site Map | Terms Of Use | Privacy Policy
Start Your Project | Tell Your Friends About Us | Site Map | Terms Of Use | Privacy Policy
