ASSEMBLY INSTRUCTIONS - APPLIANCE GARAGE CABINET
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
SITE POLLS
Please rank the ease of assembly:
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
|
THESE ASSEMBLY INSTRUCTIONS APPLIES TO THE FOLLOWING STYLES: |
||||
 |
 |
 |
 |
 |
| Cherry Maple | Espresso Maple | French Antique Glazed | Honey Maple | Macchiato Maple |
| Click any image to enlarge | ||||
STEP 1:
Locate the front face frame 
STEP 2:
Locate the two top support pieces. 
STEP 3:
Insert the top support pieces into the pre-drilled holes in the front face frame. 
STEP 4:
Connect the top panel to the top support pieces using four screws in the pre-drilled holes on the top support pieces. 
STEP 5:
Close up on the way to connect the top panel to the top support pieces. 
STEP 6:
Connect the side panel to the front face frame using two brackets as shown in the photo.
STEP 7:
Connect the other side panel to the front face frame using two additional brackets. 
STEP 8:
Connect the back side panel to the top panel using three screws in the pre-drilled holes. 
STEP 9:
We recommend reinforce the structure of the cabinet using 3/4'' staples as shown in the photo (to connect the back side panel to the front side panel). You may also use the supplied brackets instead of staples to complete this task 
STEP 10:
Repeat the last two steps with the other back side panel. 
STEP 11:
Slide in the back panel and secure with four screws in the pre-drilled holes. 
STEP 12:
Slide in the door into the slots starting from the bottom to the top. 
STEP 13:
Flip the cabinet and make sure the doors opens and closes properly. 
STEP 14:
Your cabinet is now ready! 
My Kitchen Pro |
View Quote |
Design Service |
Cabinets Catalogs |
Research Center
Start Your Project | Tell Your Friends About Us | Site Map | Terms Of Use | Privacy Policy
Start Your Project | Tell Your Friends About Us | Site Map | Terms Of Use | Privacy Policy
