Individual Cabinet Assembly Instructions

Locate the face frame.

Remove the door in order to prevent damages during assembly and installation.

Screw the pins in the pre-drilled holes on the face frame.

Screw the pins into the pre-drilled holes on each of the side panels.

Optional: Use carpenters glue to glue connections.

Place the side panel into the groove of the face frame. Make sure all the pins are aligned and inserted into the pre-drilled holes on the side panel.

Insert the back panel. Make sure the pins are aligned and inserted into the pre-drilled holes on the side panel.

Repeat Step 4 with the other side panel.

Slide in the back of the cabinet.

Insert and tighten the cam locks.

Attach the drawer guide holders to the back of the cabinet using the pre-drilled holes. Make sure both of them are aligned and level.

Connect the plastic corner brackets to add support to the cabinet structure.

Place the drawer guides into the holders and connect them to the back of the cabinet.

Connect the drawer guides to the front of the cabinet within the inner side of the face frame.

Connect the side of the drawer to the drawer face by securing the screws in the pre-drilled holes on the side of the drawer.

Repeat this step with the other side of the drawer.

Slide in the bottom panel of the drawer.

Connect the back panel of the drawer into both side panels using two screws for each side.

Set the drawer in its place. Insert the adjustable shelves using the supplied shelf holders.

Congratulations, your cabinet is ready!

Connect the face frame to the cabinet frame.

Make sure to insert and tighten the cam lock of the joint between the two frames (one on the top and one on the bottom).

Turn the frame sideways and inset the side panel into the groove.

Secure it with cam locks.

Identify the top and bottom spinning trays.

Note: The the top shelf has a bigger 90 degree cut on the bottom left corner (the right panel in the photo).

Set the bottom shelf in its place and secure it with the cam locks.

Insert the left back panel into its place and secure it with the cam locks.

Set the top shelf with the spinning tray in its place and secure it with screws.

This is another view of the cabinet with both spinning trays installed.

Set the right back panel and the other side panel in their place and secure them with the cam locks.

Secure the side panel to the face frame using the screws.

Connect the toe kick plates to each other using two screws in the pre-drilled holes.

Connect the toe kick plate to the cabinet using the pre-drilled holes.

Screw the pins into the pre-drilled holes on the side panels (four in each panel).

Place the side panel on the face frame into the groove. Make sure that the pins can go into the pre-drilled holes on the side panel.

After the pins are inserted, insert the cam lock into the pre-drilled holes and tighten it using a regular screwdriver.

Repeat this step with all the panels.

Slide the back panel into the groves of the side panels.

Place the adjustable shelves using the provided shelf holders.



Congratulations! Your cabinet is ready.