Phone 877-210-6361 1SIGN UP 2REVIEW DESIGNS 3APPROVE QUOTE
All Doors
All Doors

Individual Cabinet Assembly Instructions

Shaker Chestnut

Recommended Tools:
Flathead / Philips Screwdriver
Required Tool
Electric Screwdriver
Recommended Tool
Rubber Head Hummer
Recommended Tool
3/4" Staples Gun
Recommended Tool
Hot Glue Gun
Recommended Tool

Base Cabinet

STEP 1:

Locate the face frame.

Remove the door in order to prevent damages during assembly and installation.

Screw the pins in the pre-drilled holes on the face frame.

Kitchen Cabinets - Assembly Picture
STEP 2:

Screw the pins into the pre-drilled holes on each of the side panels.

Optional: Use carpenters glue to glue connections.

Kitchen Cabinets - Assembly Picture
STEP 3:

Place the side panel into the groove of the face frame. Make sure all the pins are aligned and inserted into the pre-drilled holes on the side panel.

Kitchen Cabinets - Assembly Picture
STEP 4:

Insert the back panel. Make sure the pins are aligned and inserted into the pre-drilled holes on the side panel.

Kitchen Cabinets - Assembly Picture
STEP 5:

Repeat Step 4 with the other side panel.

Kitchen Cabinets - Assembly Picture
STEP 6:

Slide in the back of the cabinet.

Kitchen Cabinets - Assembly Picture
STEP 7:

Insert and tighten the cam locks.

Kitchen Cabinets - Assembly Picture
STEP 8:

Attach the drawer guide holders to the back of the cabinet using the pre-drilled holes. Make sure both of them are aligned and level.

Kitchen Cabinets - Assembly Picture
STEP 9:

Connect the plastic corner brackets to add support to the cabinet structure.

Kitchen Cabinets - Assembly Picture
STEP 10:

Place the drawer guides into the holders and connect them to the back of the cabinet.

Connect the drawer guides to the front of the cabinet within the inner side of the face frame.

Kitchen Cabinets - Assembly Picture
STEP 11:

Locate all of the drawer parts.

Kitchen Cabinets - Assembly Picture
STEP 12:

Connect the side of the drawer to the drawer face by securing the screws in the pre-drilled holes on the side of the drawer.

Repeat this step with the other side of the drawer.

Kitchen Cabinets - Assembly Picture
STEP 13:

Slide in the bottom panel of the drawer.

Kitchen Cabinets - Assembly Picture
STEP 14:

Connect the back panel of the drawer into both side panels using two screws for each side.

Kitchen Cabinets - Assembly Picture
STEP 15:

Set the drawer in its place. Insert the adjustable shelves using the supplied shelf holders.

Congratulations, your cabinet is ready!

Kitchen Cabinets - Assembly Picture

Base Lazy Susan

STEP 1:

Remove the doors from the face frame.

Screw the pins into the face frame.

Kitchen Cabinets - Assembly Picture
STEP 2:

Connect the face frame to the cabinet frame.

Kitchen Cabinets - Assembly Picture
STEP 3:

Make sure to insert and tighten the cam lock of the joint between the two frames (one on the top and one on the bottom).

Kitchen Cabinets - Assembly Picture
STEP 4:

Turn the frame sideways and inset the side panel into the groove.

Secure it with cam locks.

Kitchen Cabinets - Assembly Picture
STEP 5:

Identify the top and bottom spinning trays.

Note: The the top shelf has a bigger 90 degree cut on the bottom left corner (the right panel in the photo).

Kitchen Cabinets - Assembly Picture
STEP 6:

Set the bottom shelf in its place and secure it with the cam locks.

Kitchen Cabinets - Assembly Picture
STEP 7:

Insert the left back panel into its place and secure it with the cam locks.

Kitchen Cabinets - Assembly Picture
STEP 8:

Set the top shelf with the spinning tray in its place and secure it with screws.

Kitchen Cabinets - Assembly Picture
STEP 9:

This is another view of the cabinet with both spinning trays installed.

Kitchen Cabinets - Assembly Picture
STEP 10:

Set the right back panel and the other side panel in their place and secure them with the cam locks.

Kitchen Cabinets - Assembly Picture
STEP 11:

Secure the side panel to the face frame using the screws.

Kitchen Cabinets - Assembly Picture
STEP 12:

Connect the plastic corner brackets to support the cabinet structure.

Kitchen Cabinets - Assembly Picture
STEP 13:

Connect the toe kick plates to each other using two screws in the pre-drilled holes.

Kitchen Cabinets - Assembly Picture
STEP 14:

Connect the toe kick plate to the cabinet using the pre-drilled holes.

Kitchen Cabinets - Assembly Picture
STEP 15:

Congratulations! Your cabinet is ready!

Kitchen Cabinets - Assembly Picture

Wall Cabinet

STEP 1:

Locate the face frame of the cabinet.

Kitchen Cabinets - Assembly Picture
STEP 2:

Remove the door in order to prevent damages during assembly and installation.

Kitchen Cabinets - Assembly Picture
STEP 3:

Screw the pins into the pre-drilled holes on the face frame (two on each side).

Kitchen Cabinets - Assembly Picture
STEP 4:

Screw the pins into the pre-drilled holes on the side panels (four in each panel).

Kitchen Cabinets - Assembly Picture
STEP 5:

Place the side panel on the face frame into the groove. Make sure that the pins can go into the pre-drilled holes on the side panel.

Kitchen Cabinets - Assembly Picture
STEP 6:

Repeat Step 5 for the side, top and bottom panels.

Kitchen Cabinets - Assembly Picture
STEP 7:

After the pins are inserted, insert the cam lock into the pre-drilled holes and tighten it using a regular screwdriver.

Repeat this step with all the panels.

Kitchen Cabinets - Assembly Picture
STEP 8:

Slide the back panel into the groves of the side panels.

Kitchen Cabinets - Assembly Picture
STEP 9:

Secure the back panel to the cabinet using the provided screws into the pre-drilled holes.

Kitchen Cabinets - Assembly Picture
STEP 10:

Place the adjustable shelves using the provided shelf holders.



Congratulations! Your cabinet is ready.

Kitchen Cabinets - Assembly Picture